Car Speaker Replacement: How to Do It Yourself
Did you know that loud music releases endorphins? This is why so many people enjoy loud music while driving- the sense of euphoria. If sound systems are something that you’re passionate about, then you may want to consider an aftermarket sound system for your car.
If cost is a concern, the good news is that you can improve the sound of your car at a relatively low price by replacing the system yourself. If you have all the right tools, the only overhead you’ll incur is the cost of the speakers.
Not good with cars? Don’t worry; this guide will show you everything you need to know for a car speaker replacement. Let’s begin!
What You’ll Need for Your Car Speaker Replacement
When replacing car speakers, the first thing to figure out is what tools and equipment you’ll need. For most car speaker replacements, consider having a variety of screwdrivers, Torx drivers and bits, a drill, Allen wrenches, a socket wrench set, a wire cutter, soldering iron, a crimping tool, electrical tape, a hobby knife, and a file.
You may not need all of these tools, but it certainly helps to have them in case. It could make some of the steps easier.
Check the Dimensions of the Speakers
Another thing you’ll want to make sure to do is carefully measure your new speakers’ dimensions. Some after-market speakers may require modifications to fit in place. This can take time and add complexity to the process.
If possible, find speakers already in the space for the stock speakers.
Connect the Speakers to the Electrical Speakers
When installing your speakers, be sure to disconnect your battery to prevent electrical damage. Then, take off the protective panels covering your speakers and remove the factory speaker.
Once the factory speaker is removed, your next step is to connect your new speakers to the electrical speaker of your car. This usually only involves plugging your speaker’s wiring into the car’s wiring harness.
However, you may need to connect your speaker using a crimping tool for some cars. If you’re unsure how to do this, take a look at the instructions that come with your speakers.
Once your speakers are connected to your electrical system, you’re ready for the final steps. You can now test your speakers and see that it’s working. If it’s not playing any sound, it’s likely an issue with the electrical setup.
Then, you secure the new speaker and install any subwoofers that you have. If you want high-quality subwoofers, be sure to check out the options available at Black Diamond.
You can then complete the process by replacing the protective panels.
Now You Know How to Install a New Car Speaker Replacement
Now that you know how to replace car speakers, you’ll be able to have your new stereo system installed in no time. The good news is that a car speaker replacement is far from the most complicated or expensive piece of equipment you may install.
Even if you’re not super knowledgeable about cars, you can feel confident that you can do it with some time and patience. And if you’re unsure whether it’s worth it, just remember what you’re missing out on. Life is too short for lousy sound systems, so why not give it a try?
And for more DIY car projects, be sure to check out the rest of our blog. We have a bunch of other awesome articles that you’ll love!